Back

EVS-EN IEC 61000-4-11:2020

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase

General information
Valid from 04.05.2020
Base Documents
IEC 61000-4-11:2020; EN IEC 61000-4-11:2020; EVS-EN IEC 61000-4-11:2020/AC:2020; EVS-EN IEC 61000-4-11:2020/AC:2022
Directives or regulations
None

Standard history

Status
Date
Type
Name
15.11.2022
Corrigendum
01.07.2020
Corrigendum
04.05.2020
Main + corrigendum
15.11.2019
Main + amendment
16.08.2017
Amendment
EVS-EN 61000-4-11:2004/A1:2017
10.12.2004
Main
EVS-EN 61000-4-11:2004
This part of IEC 61000 defines the immunity test methods and range of preferred test levels
for electrical and electronic equipment connected to low-voltage power supply networks for
voltage dips, short interruptions, and voltage variations.
This document applies to electrical and electronic equipment having a rated input current not
exceeding 16 A per phase, for connection to 50 Hz or 60 Hz AC networks.
It does not apply to electrical and electronic equipment for connection to 400 Hz AC networks.
Tests for these networks will be covered by future IEC documents.
The object of this document is to establish a common reference for evaluating the immunity of
electrical and electronic equipment when subjected to voltage dips, short interruptions and
voltage variations.
NOTE 1 Voltage fluctuation immunity tests are covered by IEC 61000-4-14.
The test method documented in this document describes a consistent method to assess the
immunity of equipment or a system against a defined phenomenon.
NOTE 2 As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the
IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this
immunity test standard should be applied or not, and, if applied, they are responsible for defining the appropriate
test levels. Technical committee 77 and its sub-committees are prepared to co-operate with product committees in
the evaluation of the value of particular immunity tests for their products.
*
*
*
PDF
20.74 € incl tax
PDF redline
26.96 € incl tax
Paper
20.74 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 61000-4-4:2012

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test (IEC 61000-4-4:2012)
Newest version Valid from 05.12.2012
Main

EVS-EN IEC 61000-4-3:2020

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2020)
Newest version Valid from 31.12.2020
Main + amendment

EVS-EN 61000-4-5:2014+A1:2017

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
Newest version Valid from 15.11.2019
Main

EVS-EN 61000-4-2:2009

Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
Newest version Valid from 04.06.2009