Skip to main content
Back

EVS-EN IEC 61000-4-3:2020

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2020)

General information

Valid from 31.12.2020
Base Documents
EN IEC 61000-4-3:2020; IEC 61000-4-3:2020
Directives or regulations
None

Standard history

Status
Date
Type
Name
31.12.2020
Main
04.11.2010
Amendment
08.10.2009
Corrigendum
07.04.2008
Amendment
07.09.2006
Main

IEC 61000-4-3 applies to the immunity requirements of electrical and electronic equipment to radiated electromagnetic energy. It establishes test levels and the required test procedures. It establishes a common reference for evaluating the immunity of electrical and electronic equipment when subjected to radiated, radio-frequency electromagnetic fields. The test method describes a consistent method to assess the immunity of equipment or systems against RF electromagnetic fields from RF sources not near the EUT.

Test methods are defined in IEC 61000-4-3 for evaluating the effect that electromagnetic radiation has on the equipment concerned. The simulation and measurement of electromagnetic radiation are not adequately exact for the quantitative determination of impact. The test methods defined in this basic document aim to establish an adequate reproducibility of testing configuration and repeatability of test results at various test facilities.

IEC 61000-4-3 is an independent test method. It is not possible to use other test methods as substitutes for claiming compliance with this document.

The text of IEC 61000-4-3:2020 has been approved in Europe as EN IEC 61000-4-3:2020 without any changes.

Required fields are indicated with *

*
*
*
PDF
39.04 € incl tax
PDF redline
50.75 € incl tax
Paper
39.04 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring

Customers who bought this item also bought

Main

EVS-EN 61000-4-2:2009

Electromagnetic compatibility (EMC) -- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
Newest version Valid from 04.06.2009
Main + amendment

EVS-EN 61000-4-5:2014+A1:2017

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
Newest version Valid from 15.11.2019
Main

EVS-EN 61000-4-4:2012

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test (IEC 61000-4-4:2012)
Newest version Valid from 05.12.2012
Main + corrigendum

EVS-EN IEC 61000-4-11:2020

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
Newest version Valid from 04.05.2020