Back

EVS-EN ISO 19014-4:2020

Earth-moving machinery - Functional safety - Part 4: Design and evaluation of software and data transmission for safety-related parts of the control system (ISO 19014-4:2020)

General information

Valid from 01.09.2020
Base Documents
ISO 19014-4:2020; EN ISO 19014-4:2020
ICS Groups
53.100 Earth-moving machinery
Directives or regulations
None

Standard history

Status
Date
Type
Name
Main
prEN ISO 19014-4
01.09.2020
Main
EVS-EN ISO 19014-4:2020
This document specifies general principles for software development and signal transmission requirements of safety-related parts of machine-control systems (MCS) in earth-moving machinery (EMM) and its equipment, as defined in ISO 6165. In addition, this document addresses the significant hazards as defined in ISO 12100 related to the software embedded within the machine control system. The significant hazards being addressed are the incorrect machine control system output responses from machine control system inputs.
Cyber security is out of the scope of this document.
NOTE For guidance on cybersecurity, see an appropriate security standard.
This document is not applicable to EMM manufactured before the date of its publication.

Required fields are indicated with *

*
*
*
PDF
26.84 € incl tax
Paper
26.84 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring
English (PDF 454 KB)

Related products

Main

EVS-EN ISO 13766-1:2018

Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions (ISO 13766-1:2018)
Newest version Valid from 18.06.2018
Main

EVS-EN ISO 2867:2011

Earth-moving machinery - Access systems (ISO 2867:2011)
Newest version Valid from 03.08.2011
Main

EVS-EN ISO 2860:2008

Earth-moving machinery - Minimum access dimensions
Newest version Valid from 09.01.2009
Main

EVS-EN ISO 13766-2:2018

Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018)
Newest version Valid from 18.06.2018

Customers who bought this item also bought

Main

EVS-EN ISO 19014-1:2018

Earth-moving machinery - Functional safety - Part 1: Methodology to determine safety-related parts of the control system and performance requirements (ISO 19014-1:2018, Corrected version 2019-02)
Newest version Valid from 04.09.2018
Main

EVS-EN ISO 19014-3:2018

Earth-moving machinery - Functional safety - Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system (ISO 19014-3:2018)
Newest version Valid from 02.11.2018
Main

EVS-EN ISO 19014-2:2022

Earth-moving machinery - Functional safety - Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system (ISO 19014-2:2022)
Newest version Valid from 15.07.2022
Main

EVS-EN ISO 13766-1:2018

Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions (ISO 13766-1:2018)
Newest version Valid from 18.06.2018

Standards designation

EVS Estonian standard
EN European standard (published by an CEN or CENELEC)
EN ISO International standard adopted as an European standard
ISO International Organization for Standardization’s standard
IEC International Electrotechnical Commission’s standard
HD CENELEC’s harmonisation document
   
EVS-EN European standard implemented in Estonia
EVS-EN ISO International standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IEC International standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IEC International electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
   
A, AMD amedment
+A a full standard plus the amendment
/A only amendment
COR, AC corrigendum
+COR a full standard plus the corrigendum
NA national annex
+NA a full standard plus the national annex
/NA only national annex
TS technical specification
TR technical report
CWA agreement, developed by a CEN or CENELEC
prEVS-EN (etc) draft standard
   
et the standard is in Estonian only
en the standard is in English only
et-en the standard is in Parallel text Estonian-English