Back

ISO 4308-1:2003

Cranes and lifting appliances -- Selection of wire ropes -- Part 1: General

General information

Withdrawn from 03.07.2013
ICS Groups
53.020.30 Accessories for lifting equipment
Directives or regulations
None

Standard history

Status
Date
Type
Name
03.07.2013
Main
ISO 16625:2013
Main
ISO 4308-1:2003
Main
ISO 4308-1:1986
ISO 4308-1:2003 specifies two methods for the selection of wire rope to be used on lifting appliances as designated in ISO 4306-1, one based on the value of the rope selection factor C and the other based on the value of the coefficient of utilization Zp  ISO 4308-1:2003 establishes the minimum requirements for acceptable strength and performance levels of wire ropes with respect to the design, application and maintenance of the lifting appliance. ISO 4308-1:2003 establishes the minimum requirements for the diameters of drums and sheaves that are to be associated with the selected wire rope.A non-exhaustive list of types of lifting appliance to which ISO 4308-1:2003 is applicable is given in Annex A.
Annex B provides some examples of rope selection.Annex C gives factors, additional to those mentioned above, which may need consideration when selecting the wire rope.Annex D specifies the selection method for the diameter of the compensating sheave when used in relation to hoists.

Required fields are indicated with *

*
*
*
PDF
169.14 € incl tax
Paper
169.14 € incl tax
Standard monitoring
English (PDF 166 KB)

Related products

Main

ISO 16625:2013

Cranes and hoists -- Selection of wire ropes, drums and sheaves
Newest version Valid from 03.07.2013
Main

EVS-EN 13155:2020

Crane - Safety - Non-fixed load lifting attachments
Newest version Valid from 31.12.2020
Main + amendment

EVS-EN 13155:2003+A2:2009

Cranes - Safety - Part 1: Non-fixed load lifting attachments CONSOLIDATED TEXT
Withdrawn from 31.12.2020
Main

EVS-EN 14502-1:2010

Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets
Newest version Valid from 06.09.2010

Customers who bought this item also bought

Main

EVS-ISO 1999:2002

Acoustics - Determination of occupational noise exposure and estimation of noise-induced hearing impairment
Withdrawn from 04.04.2017
Main

EVS-EN ISO 1460:1999

Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area
Withdrawn from 02.10.2020
Main

EVS-EN ISO 1461:2009

Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods
Withdrawn from 01.12.2022
Main + corrigendum

EVS-EN 1090-1:2009

Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
Withdrawn from 05.12.2011

Standards designation

EVS Estonian standard
EN European standard (published by an CEN or CENELEC)
EN ISO International standard adopted as an European standard
ISO International Organization for Standardization’s standard
IEC International Electrotechnical Commission’s standard
HD CENELEC’s harmonisation document
   
EVS-EN European standard implemented in Estonia
EVS-EN ISO International standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IEC International standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IEC International electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
   
A, AMD amedment
+A a full standard plus the amendment
/A only amendment
COR, AC corrigendum
+COR a full standard plus the corrigendum
NA national annex
+NA a full standard plus the national annex
/NA only national annex
TS technical specification
TR technical report
CWA agreement, developed by a CEN or CENELEC
prEVS-EN (etc) draft standard
   
et the standard is in Estonian only
en the standard is in English only
et-en the standard is in Parallel text Estonian-English