Tagasi

EVS-EN 16602-70-13:2015

Space product assurance - Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes

Üldinfo
Kehtiv alates 04.03.2015
Alusdokumendid
ECSS-Q-ST-70-13C_Rev1; EN 16602-70-13:2015
Direktiivid või määrused
puuduvad

Standardi ajalugu

Staatus
Kuupäev
Tüüp
Nimetus
04.03.2015
Põhitekst
06.05.2002
Põhitekst
This Standard details a test in which pressure‐sensitive tapes are used to assess the suitability of, for example, coatings, paints, films and other thin materials, proposed for use on spacecraft and associated equipment.
Surface coatings, such as thermal control paints and corrosion protection
coatings, are affected, both on the ground and after launch, by exposure to the environment.
It is therefore important that the adhesion of the coating to the relevant substrate remains at an acceptable level after exposure to the relevant environmental condition.
The following materials and assemblies are covered by this test method:
organic coating, e.g. varnishes, paints and plastic films; metallic finishes on, for example, printed circuit boards, second‐surface mirrors, thermal radiators, plastic films; adhesive layers; composite thin films; small assemblies, e.g. solar cells having attached glass covers.
This standard may be tailored for the specific characteristics and constrains of a space project in conformance with ECSS-S-ST-00.
*
*
*
PDF
17,08 € koos KM-ga
Paber
17,08 € koos KM-ga
Sirvi standardit alates 2,44 € koos KM-ga
Standardi monitooring

Teised on ostnud veel

Põhitekst

EVS-EN 16602-70-31:2014

Space product assurance - Application of paints and coatings on space hardware
Uusim versioon Kehtiv alates 09.12.2014
Põhitekst

EVS-EN 16602-70-04:2014

Space product assurance - Thermal testing for the evaluation of space materials, processes, mechanical parts and assemblies
Uusim versioon Kehtiv alates 07.11.2014
Põhitekst

EVS-EN 16602-60-13:2015

Space product assurance - Requirements for the use of COTS components
Kehtetu alates 17.07.2023
Põhitekst

EVS-EN IEC 60812:2018

Failure modes and effects analysis (FMEA and FMECA)
Uusim versioon Kehtiv alates 02.11.2018