Tagasi

EVS-EN IEC 60404-7:2020

Magnetic materials - Part 7: Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an open magnetic circuit

Üldinfo
Kehtiv alates 04.05.2020
Alusdokumendid
EN IEC 60404-7:2020; IEC 60404-7:2019
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
04.05.2020
Põhitekst
06.10.2015
Põhitekst
This part of IEC 60404 specifies a method of measurement of the coercivity of magnetic materials in an open magnetic circuit. This document is applicable to all magnetic materials with coercivities from 0,2 A/m to 160 kA/m. NOTE Examples of magnetic materials covered by this document are amorphous alloys, nanocrystalline alloys, all softmagnetic crystalline materials (e.g. Fe, FeSi-, CoFe- and FeNi-alloys), soft ferrites, hard metals, semi-hard magnetic alloys (e.g. FeCoTiAl-, FeCoV-, FeCrCo- and AlNiCo-alloys) [1]1. Special precautions are to be taken in measuring coercivities below 40 A/m, in materials with high conductivity and in test specimens which have a shape different from ellipsoids (see Annex A).
*
*
*
PDF
12,23 € koos KM-ga
Paber
12,23 € koos KM-ga
Hind: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Muudatus

EVS-EN 60404-15:2012/A1:2017

Magnetic materials - Part 15: Methods for the determination of the relative magnetic permeability of feebly magnetic materials
Uusim versioon Kehtiv alates 02.03.2017
Põhitekst

EVS-EN 60404-8-6:2017

Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials
Uusim versioon Kehtiv alates 03.05.2017
Põhitekst

EVS-EN 60404-1:2017

Magnetic materials - Part 1: Classification
Uusim versioon Kehtiv alates 03.02.2017
Põhitekst

EVS-EN IEC 60404-6:2018

Magnetic materials - Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
Uusim versioon Kehtiv alates 01.08.2018