Tagasi

EVS-EN ISO 14644-9:2022

Cleanrooms and associated controlled environments - Part 9: Assessment of surface cleanliness for particle concentration (ISO 14644-9:2022)

Üldinfo
Kehtiv alates 01.06.2022
Alusdokumendid
ISO 14644-9:2022; EN ISO 14644-9:2022
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
01.06.2022
Põhitekst
05.09.2012
Põhitekst
This document establishes a procedure for the assessment of particle cleanliness levels on solid surfaces in cleanrooms and associated controlled environment applications. Recommendations on testing and measuring methods, as well as information about surface characteristics, are given in Annexes A to D. This document applies to all solid surfaces in cleanrooms and associated controlled environments, such as walls, ceilings, floors, working environments, tools, equipment and products. The procedure for the assessment of surface cleanliness by particle concentration (SCP) is limited to particles of between 0,05 µm and 500 µm. The following issues are not considered in this document: —    requirements for the cleanliness and suitability of surfaces for specific processes; —    procedures for the cleaning of surfaces; —    material characteristics; —    references to interactive bonding forces or generation processes that are usually time-dependent and process-dependent; —    selection and use of statistical methods for assessment and testing; —    other characteristics of particles, such as electrostatic charge, ionic charges and microbiological state.
*
*
*
PDF
16,70 € koos KM-ga
PDF redline
20,04 € koos KM-ga
Paber
16,70 € koos KM-ga
Sirvi standardit: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

EVS-EN ISO 14644-10:2022

Cleanrooms and associated controlled environments - Part 10: Assessment of surface cleanliness for chemical contamination (ISO 14644-10:2022)
Uusim versioon Kehtiv alates 01.06.2022
Muudatus

EVS-EN ISO 11607-1:2020/A11:2022

Lõplikult steriliseeritud meditsiiniseadme pakendamine. Osa 1: Nõuded materjalile, steriilsele barjäärile ja pakendusele
Kehtiv alates 01.07.2022
Muudatus

EVS-EN ISO 11607-2:2020/A11:2022

Lõplikult steriliseeritud meditsiiniseadme pakendamine. Osa 2: Valideerimisnõuded vormimis-, hermetiseerimis- ja koosteprotsessile
Kehtiv alates 01.07.2022
Muudatus

EVS-EN ISO 14971:2019/A11:2021

Meditsiiniseadmed. Riskihalduse rakendamine meditsiiniseadmetele
Kehtiv alates 15.12.2021