Tagasi

EVS-EN ISO 52017-1:2017

Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017)

Üldinfo
Kehtiv alates 02.08.2017
Alusdokumendid
ISO 52017-1:2017; EN ISO 52017-1:2017
Tegevusala (ICS grupid)
91.120.10 Soojusisolatsioon
Direktiivid või määrused
puuduvad
Standardi ajalugu
Staatus
Kuupäev
Tüüp
Nimetus
02.08.2017
Põhitekst
03.05.2012
Põhitekst
03.05.2012
Põhitekst
05.11.2007
Põhitekst
05.11.2007
Põhitekst
ISO 52017-1:2017 specifies the general assumptions, boundary conditions and equations for the calculation, under transient hourly or subhourly conditions, of the internal temperatures (air and operative) and/or the heating, cooling and humidification and dehumidification loads to hold a specific (temperature, moisture) set point, in a single building zone. No specific numerical techniques are imposed by ISO 52017-1:2017. Specific calculation procedures based on the generic calculation procedures of ISO 52017-1:2017 are given in ISO 52016-1. The specific simplifications, assumptions and boundary conditions in ISO 52016-1 are tailored to the respective application areas, such as the energy need for heating and cooling and for humidification and dehumidification, hourly internal temperature, design heating and cooling and humidification and dehumidification load. NOTE Table 1 in the Introduction shows the relative position of ISO 52017-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.
*
*
*
PDF
19,32 € koos KM-ga
Paber
19,32 € koos KM-ga
Hind: 2,40 € koos KM-ga
Standardi monitooring
Teised on ostnud veel
Põhitekst

EVS-EN ISO 52016-1:2017

Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017)
Uusim versioon Kehtiv alates 02.08.2017
Põhitekst

EVS-EN ISO 13786:2017

Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017, Corrected version 2018-03)
Uusim versioon Kehtiv alates 02.08.2017
Põhitekst

EVS-EN ISO 13789:2017

Thermal performance of buildings - Transmission and ventilation heat transfer coefficients - Calculation method (ISO 13789:2017)
Uusim versioon Kehtiv alates 02.08.2017
Põhitekst

EVS-EN ISO 52022-1:2017

Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-1:2017)
Uusim versioon Kehtiv alates 02.08.2017