Back

EVS-EN ISO 16890-4:2022

Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO 16890-4:2022)

General information

Valid from 15.09.2022
Base Documents
ISO 16890-4:2022; EN ISO 16890-4:2022
ICS Groups
91.140.30 Ventilation and air-conditioning systems
Directives or regulations
None

Standard history

Status
Date
Type
Name
15.09.2022
Main
EVS-EN ISO 16890-4:2022
03.01.2017
Main
EVS-EN ISO 16890-4:2016
This document establishes a conditioning method to determine the minimum fractional test efficiency.
It is intended to be used in conjunction with ISO 16890‑1, ISO 16890‑2 and ISO 16890‑3, and provides the related test requirements for the test device and conditioning cabinet as well as the conditioning procedure to follow.
The conditioning method described in this document is referring to a test device with a nominal face area of 610 mm × 610 mm (24 inches × 24 inches).
This document refers to particulate air filter elements for general ventilation having an ePM1 efficiency less than or equal to 99 % and an ePM10 efficiency greater than 20 % when tested according to the procedures defined within the ISO 16890 series.
NOTE      The lower limit for this test procedure is set at a minimum ePM10 efficiency of 20 % since it will be very difficult for a test filter element below this level to meet the statistical validity requirements of this procedure.
Filter elements used in portable room-air cleaners are excluded from the scope of this document.

Required fields are indicated with *

*
*
*
PDF
15.86 € incl tax
Paper
15.86 € incl tax
Browse standard from 2.44 € incl tax
Standard monitoring
English (PDF 530 KB)

Related products

Main + corrigendum

EVS 812-2:2014

Fire safety of constructions - Part 2: Ventilation systems
Newest version Valid from 01.04.2014
Main

EVS 906:2018

Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems. Estonian National Annex for EVS-EN 16798-3:2017
Newest version Valid from 15.02.2018
Main

EVS 906:2010

Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems. Estonian National Annex for EVS-EN 13779:2007
Withdrawn from 15.02.2018
Main

CEN/TR 14788:2006

Ventilation for buildings - Design and dimensioning of residential ventilation systems
Newest version Valid from 05.05.2006

Customers who bought this item also bought

Main

EVS-EN ISO 16890-2:2022

Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2022)
Newest version Valid from 15.09.2022
Main

EVS-EN ISO 16276-1:2007

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a dry film - Part 1: Pull-off testing
Newest version Valid from 04.07.2007
Main

EVS-EN ISO 16276-2:2007

Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a dry film - Part 2: Cross-cut test and X-cut testing
Newest version Valid from 04.07.2007
Main

EVS-EN ISO 16890-3:2016

Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016)
Newest version Valid from 03.01.2017

Standards designation

EVS Estonian standard
EN European standard (published by an CEN or CENELEC)
EN ISO International standard adopted as an European standard
ISO International Organization for Standardization’s standard
IEC International Electrotechnical Commission’s standard
HD CENELEC’s harmonisation document
   
EVS-EN European standard implemented in Estonia
EVS-EN ISO International standard adopted in Europe and implemented in Estonia
EVS-EN ISO/IEC International standard/International electrotechnical standard adopted in Europe and implemented in Estonia
EVS-IEC International electrotechnical standard implemented in Estonia
EVS-ISO International standard implemented in Estonia
   
A, AMD amedment
+A a full standard plus the amendment
/A only amendment
COR, AC corrigendum
+COR a full standard plus the corrigendum
NA national annex
+NA a full standard plus the national annex
/NA only national annex
TS technical specification
TR technical report
CWA agreement, developed by a CEN or CENELEC
prEVS-EN (etc) draft standard
   
et the standard is in Estonian only
en the standard is in English only
et-en the standard is in Parallel text Estonian-English